Professor; Ph. D supervisor

Address:Room B403 School of Mechanical Engineering

Phone:(86)013605288429, (86)511-88797369

Fax:(86)511-8897369

E-mail:wangsl@ujs.edu.cn, wangshulin@163.com

Education

2006.04-2007.04 Visiting scholar, Technology University of Ilmenau , Germany

1999.09-2003.12 Ph. D, Mechanical Manufacturing and Automation, Jiangsu University, Zhenjiang, Jiangsu Province P.R. China

1995.09-1999.07 B.S., Solid mechanics, Jiangsu University, Zhenjiang, Jiangsu Province P.R. China

Professional Experience

2005- PH.D Supervisor, Jiangsu University, China

2004- Professor, Jiangsu University, China

2006-2007 Visiting Scholar, TU Illmenau, Germany

1996-2004 Associate professor, Jiangsu University, China

1990-1996 Lecturer, Jiangsu University, China

Social academic post

Member of the Technical Committee on Cutting tool of Standardization Committee of China(SAC/TC 91)

Research interests

1. Tooling system for HSM.The static and dynamic characteristics of different types of tooling system for HSM are researched by several theoretical and experimental methods. The following fields are focused on:

(1) New structures of tooling system for HSM

(2) Safety and Reliability of tooling system for HSM

(3) Accuracy design of critical dimensions of tooling system for HSM

2. Precision measurement.Two main fields are focused on:

(1) New methods and devices of measurement for special precision parts and special procedures of processing

(2) Reference transfer in precision measurements.

3. Micro-actuator technology.The research interest includes:

(1) New materials of micro-actuator

(2) New mechanism of micro-actuator

(3) Application of micro-actuator

Teaching Courses

(1) Design of Machine Manufacturing Equipment

(2) Technology of Mechanical Manufacture

(3) Technology of Precision Manufacturing

(4) Technology of inspect and failure diagnosis

Honors and Awards

(1) The Second Class Awards for Science and Technology Progress from the State Ministry of Education(2004,2015).

(2) The Second Class Awards for Science and Technology Progress from Jiangsu Province(2003).

(3) The Third Class Awards for Science and Technology Progress from the State Ministry of machine building .(1997,2001,2005,2015).

Main Research Projects

(1) Research on the design theory and measure technology of spindle/interface for high-grade NC machine tools (No. 512275217), NSFC, 2012-2017.

(2) Research on performance testing and testing technology platform of High Performance NC cutting tools (No. 2015ZX04003031), Major national research and development projects, 2015-2018.

(3) The new tooling systems for high speed NC machine tools (No. 2009ZX0412-07),2009-2012.

(4) Tool detector of High precision and intelligent system for NC machine tools (No. 15C26215201908), Innovation fund project of Small and medium sized enterprises from Ministry of science and technology, 2015-2018.

(5) Study on the Burr Formation Mechanism and Control Technology in Micro-machining(No. 51075192), NSFC,2010-2013.

(6) Mechanism and control of burr formation in high speed machining (No. 50675088), NSFC,2006-2009.

Main Scientific Publications

(1) Hydraulic micro-feed actuator for precision machining on conventional CNC turning centers Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010, p 5250-5254.

(2) Experimental research on producing Nanostructured materials by machining Al6061-T6 with large strain Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010, p 944-947, 2010.

(3) Static performance parameters and analysis of the Hydraulic Expansion Toolholder,ICFIEA Advanced Materials Research, v 383-390, p 1787-1791, 2012.

(4) The performance of the Hydraulic Expansion Toolholder in high-speed rotation Advanced Materials Research, v 188, p 457-462, 2011, High Speed Machining.

(5) Analysis on the process of induction heating for shrink-fit chuck, Advanced Materials Research, v 383-390, p 2850-2855, 2012.

(6) Failure analysis of shrink fit tool chuck, 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings, p 6515-6518, 2011.

(7) Research On Long Distance Radio Frequency Identification System Of Toolholder Advanced Materials Research, v 317-319, p 1876-1881, 2011, Equipment Manufacturing Technology and Automation.

(8) Analysis of Radial Rigidity about the Hydraulic Expansion Toolholde. Advanced Materials Research, v 381, p 76-80, 2012, Advanced Manufacturing Technology and Cutting Tools.

(9) Analysis on Measurement Errors of Critical Dimensions of HSK Cone and Its Application, Applied Mechanics and Materials Vols. 239-240 (2013) pp 611-616.

(10)Analysis of axial holding capability about the lengthened shrink-fit holder and cutting tool system Advanced Materials Research, v 940, p 249-253, 2014, Machinery, Materials Science and Engineering Applications 2014.

(11)Determination of Capto C5 shank's key dimensions Materials Science Forum, v 800-801, p 417-423, 2014, High Speed Machining VI.

(12)Effect of Eu Doping on the Structural, Electrical, and Dielectric Properties of K0.5Na0.5NbO3 Ceramics for High-Temperature Capacitor Applications, JOURNAL OF ELECTRONIC MATERIALS,2015(44): 3408-3414.

Patents

(1) Wang Shulin,Zhang bing, Wang Guicheng, etc. ‘A hydraulic micro feed device with the ability to increase radial stiffness’, China Patent Appl. No.ZL200810243193.8.

(2) Wang Shulin,Wang Guicheng, Liu Yuanwei etc. ‘A universal precision displacement measuring auxiliary device and measuring method’, China Patent Appl. No. ZL200610098323.4.

(3) Wang Shulin,Liu Gang, etc. ‘A pre-balance method of a high speed rotor with complex structure’ China Patent Appl. No.ZL 201010107678.1.

(4) Wang Shulin,Wang Guicheng, etc. Testing method and device for performance of HSK tool system’ China Patent Appl. No.ZL200610161350.1.

(5) Wang Shulin,Li Zundong,Chen Wenhua, etc. ‘A simple precision displacement table’ , China Patent Appl. No.ZL 201310703247.5.

(6) Wang Shulin,Li Zundong, Chen Wenhua, etc. ‘Amacro / micro two dimensional displacement table’ China Patent Appl. No. ZL201410001358.6.

(7) Wang Shulin,Li Zundong, Chen Wenhua, etc. ‘An two dimensional assembled micro displacement table’, China Patent Appl. No. ZL201310248613.2.

(8) Wang Shulin,Wang Guicheng, Yu Junjiang,etc. ‘A multi-dimension measuring device for high speed machining tool holder’ China Patent Appl. No.ZL201110366950.2.

(9) Wang Shulin,Zhou Bo, Pei Hongjie, etc. ‘A method of cutting wafers’, China Patent Appl. No. ZL201010597232.1.

(10)Wang Shulin,Yang Zhijie, Wang Guicheng etc. ‘A method of tool holder recognition’, China Patent, Appl. No. ZL201110366982.2.

Plan for Overseas Master & Ph. D

One Ph. D