ForeignMaster Training Program ofMechanical Engineering

A subject code：（0802）

1.The discipline overview and research direction

Jiangsu University Mechanical Engineering relies on the Jiangsu University College of Mechanical Engineering, Automotive and Traffic Engineering College and College of Agricultural Equipment Engineering, Jiangsu University is the dominant discipline, Jiangsu Province, a national key disciplines to cultivate the construction of points, with machinery manufacturing and automation of the national focus ( Training) discipline, hybrid vehicle technology National Regional Engineering Research Center, eight provincial and ministerial centers and key laboratories. Post-doctoral research station was established in 1994 and was authorized by the first batch of engineering masters. In 2000, it was awarded a Ph.D. Mechanical Manufacturing and Automation Subjects received the first master's degree in 1981, PhD in 1998, is the "Eleventh Five-Year" national key (nurture) discipline. Mechanical design and theory (formerly the design and manufacture of agricultural machinery) Discipline 1981 won the first batch of doctoral points, 1987 by the former Ministry of Machinery key disciplines, in 1994 by the Jiangsu province key disciplines. Automotive engineering disciplines in 1996 by the doctoral, is the country's fourth university doctoral disciplines in this area.

Mechanical design and manufacturing and automation, vehicle engineering is a professional brand in Jiangsu Province, national characteristics and the first batch of the Ministry of Education "excellent engineer education and training program" pilot professional, mechanical manufacturing series of courses teaching team is a national outstanding teaching team, for the "long Triangle "International Manufacturing Center of Mechanical Innovation and Entrepreneurship Talents Training Model Experimental Zone is a national innovation model of personnel training mode to mechanical engineering center laboratory as the main body of the Jiangsu University Engineering Training Center (Industrial Center) is a national experimental teaching demonstration center .

The main research directions of this discipline include:

1.Photon manufacturing science and technology

2 advanced automotive technology research

3. Laser and precision machining and forming manufacturing technology

4. Micro-nano manufacturing and electromechanical system integration technology

5. Modern Mechanical Design and Theory

2.Training objectives

This course is started College of Mechanical Engineering, Jiangsu University, mainly covers mechanical manufacturing and automation, mechanical and electrical engineering, mechanical design and theory, vehicle engineering and other fields of study, aimed at improving international students' ability to innovate and research.

3.The length of study and training methods

1. learning method for full-time.

2. Years of study is generally 3 years. The first 1 to 1.5 school year is mainly used to complete the course of study, after 1.5 to 2 years to collect information, research, project research and writing thesis.

3. Master should complete 30 credits, of which no less than 14 degrees in degree courses.

4. To meet the paper published requirements, awarded the degree.

4. Course credit requirements

Course category		Course Title	Credits	Semester	Faculty open the Course	Course type	Remark
Degree courses	Public degree course	Introduction to Chinese Culture(Ⅰ)	3	1	Overseas Education College		Compulsory
		Chinese(Ⅰ)	2	1	Overseas Education College
		Chinese(II)	2	2	Overseas Education College
	Basic Theory Course	Mathematical equations	2	1	College of Science		At least 4 credits
		Matrix theory	2	1	College of Science
		Numerical Analysis	2	1	College of Science
		Mathematical Statistics	2	1	School of Management
	Core professional degree	manufacturing technology for advanced materials	3	1	School of Mechanical Engineering	Bilingual	Required
Non-degree course	Professional Elective	The technological innovation and frontier of Mechanical Engineering	2	1	School of Mechanical Engineering	Bilingual	Optional, at least 12 credits
		Material Strengthening & Quality Evaluation	2	2	School of Mechanical Engineering	Bilingual
		Modern control engineering	2	2	School of Mechanical Engineering	Full English
		Flexible manufacturing technology and system	2	2	School of Mechanical Engineering	Full English
		Principles and applications of rapid prototyping	2	2	School of Mechanical Engineering	Bilingual
		Optimal Design of Machine	2	2	School of Mechanical Engineering	Bilingual
		MEMS design and manufacturing	2	2	School of Mechanical Engineering	Bilingual
		Vibration Analysis	2	1	Automotive Institute	Bilingual
		Signal Test and Processing Techniques in Engineering	2	1	Automotive Institute	Bilingual
	Public electives	All graduate programs in all disciplines throughout the school

5.Practice credit requirements

All graduate students must complete compulsory links such as literature reading, academic activities, special seminars and practical courses during their studies, and obtain corresponding practical credits.

1.Academic activities (2 credits)

Graduate students must participate in the school organization "academic ethics seminars" and well-known domestic and foreign experts and scholars seminars, academic reports, graduate forums and other academic seminars, to participate in academic activities must form a complete academic report. Master students should attend more than 10 academic reports during the period of study (0.2 points / time). Encourage and endorse Dr. Das participating in the world's top 300 mechanical engineering disciplines of universities in the world. The Ministry of Education in 2011 evaluates the top 20 academic activities in Mechanical Engineering and the academic activities are assessed by academic disciplines or instructors.

Overseas to attend the international academic conference to read my thesis and exchange speeches once, issue valid proofs, 2 credits / time;

Domestic academic conferences to read my papers and exchange speeches 1, issued a valid certificate, 1 credit / time;

National high-level academic conference read my thesis and exchange speeches once, issued a valid proof of material, 0.5 credits / time;

2. Foreign literature reading (2 credits)

According to "mechanical engineering reading monographs, reading guide literature" read more than 20 classics and foreign literature. And complete more than 2 English translation of the literature. Degree thesis dissertation examination before the opening and record the results, unqualified person may not enter the dissertation essay session. In the English periodicals with the first author or second author (mentor for the first author) published professional academic papers, and is included in the EI / SCI can be regarded as foreign literature to read links qualified.

3. Seminar (≥ 1 credit)

During the academic year, master students must openly conduct more than one time of literature research exchange, academic research progress reports or special seminars and reports in the discipline scope; advocate English special seminars; and promote graduate interdisciplinary research.

4. Practice (1 credit)

Academic masters (except working personnel) must carry out the practical process of not less than one month (usually including teaching practice, production practice and social investigation) during the school period, and the instructor shall be responsible for the examination.

6.The steering committee and guidance

Under the guidance of tutors, students are fully responsible for formulating postgraduate training plans, guiding scientific research, teaching or professional practice, dissertations and other work, and guiding, demonstrating and supervising postgraduate moral and academic ethics.

7. Dissertations

Dissertations are the main indicators to measure the quality and academic level of postgraduates.

1.Papers open question

The opening question is the most important part of carrying out dissertation work in the process of graduate education. Before writing a dissertation, a graduate student must go through a careful investigation and study, consult a large amount of literature, especially foreign literature, and understand the history and current situation of his main research direction. On the basis of this, he will determine the dissertation research topic and make an opening report. The opening report should address the key issues of the dissertation selection, research programs, expected goals and achievements, work plans and other issues.

Postgraduate thesis on collective trial, by the discipline (college) unified organization, thesis dissertation questions must be approved by the instructor before they can proceed. Encourage discipline direction or guidance group to organize pre-open questions to ensure the quality of the open questions. Discipline Thesis expert examination team shall be set up and shall consist of at least 5 experts in the discipline or related disciplines (no less than half of the subject experts and members of the mentor and steering group must be avoided), and a person in charge shall be appointed to preside over the assessment of the opening examination. All disciplines (colleges) should be open in advance of the dissertation topic time, place and other specific information on the Internet. Each graduate student has the opportunity to open a dissertation at most twice during his / her academic study. The time between two open questions should be no less than 3 months, and the student who fails to pass the open question twice will be dropped out of school.

Master's thesis dissertation opening examination report After passing a year (at least 11 months) before applying for trial, defense.

2.Published academic papers and obtained scientific research results

During their studies, graduate students should actively write academic dissertations and obtain certain scientific research achievements. For details, please refer to the "Jiangsu University Regulations on Postgraduate Academic Papers Published in the Academic Period" and the relevant requirements of the academic degree evaluation subcommittee. If you just apply for a patent for inventions, you must have an essay submission above the core journals (which must be approved and reviewed by the tutor).

3.Thesis writing

The dissertation must be completed independently by the graduate student under the guidance of the supervisor. For the format of the dissertation, please refer to "Requirements for Writing Format of Dissertation for Graduate Students in Jiangsu University".

4.Thesis review and reply

For details of the dissertation review and defense, please refer to the related requirements of "Provisional Regulations on Academic Degrees Awarding in Jiangsu University" and "Blind Trial" of Jiangsu University Graduate Dissertation. Before the dissertation submission, you must pre-review the subject within one month in advance to ensure the quality of the submission. Encourage subject direction or guidance group to organize pre-defense, to ensure the quality of the reply.

8.The practice process and requirements

1. Participate in academic seminar in the field of mechanical engineering;

2 teaching practice: under the guidance of the tutor, to participate in teaching practice, guide undergraduate experiment, modify the experiment report or homework;

3. Social Practice: Graduate students need to participate in relevant social practice during their studies, such as solving technical problems for enterprises and providing technical support.

9. Other requirements

Other aspects of requirements see "Jiangsu University Master's program of academic training (General)."

10.Financial support

1.Chinese government scholarships can be fully funded or partially funded degree. For more information on sponsorship, please refer to the website of Overseas Education College of Jiangsu University:http://oec.ujs.edu.cn/pub/eng/Scholarship/GS/.

2. During the study period, you can apply for the financial aid of Jiangsu University based on academic performance.

Attached: the main classics to be read, the catalog of academic journals, the curriculum and the tutor's introduction

1.The opening report template

2.The main classics

3.The major professional academic journals

1、Journal of Materials Processing

2、Tribology letter

3、Hand book of micro nanotribology

4、CRC Handbook of Chemistry and Physics

5、The science and engineering of microelectronic fabrication

6、Mechanical behavior of material

7、Springer Handbook of Nanotechnology

8、Journal of Applied Physics Electronic Engineering

9、Journal of Microelectromechanical Systems

10、Journal of Micromechanics and Microengineering

11、Mechanical Systems and Signal Processing

12、Mechanim and Machine Theory

13、Form; ZeitschriftfuerGestaltung 482E0054 0015-7678 4 Springer-Verlag, GERMANY

14、The International Design Magazine

15、Advances in Structural Engineering

16、Automotive News International

17、Journal of Engineering Design

18、Active vehicle

19、Accident Analysis and Prevention

20、Advanced Powder Technology

21、Automotive Design & Production

22、Automotive Engineer

23、Journal of Computational Acoustics

24、Journal of Mechanical Design

25、Journal of Sound and Vibration

26、Journal of Safety Research

27、Journal of Vibration and Acoustics

28、Mechanical Engineering 29、Safety Scienc

30、Applied Physics Letters

31、Journal of Applied Physics

32、Nano Letters

33、Physical Review B

34、Physical Review Letters

35、Physical Review E

36、Journal of Physics D：Applied Physics

37、Acta MechanicaSinica

38、European Journal of Transport and Infrastructure Research

39、IEEE Transactions on Intelligent Transportation Systems

40、IEEE-ASME Transactions on Mechatronics

41、IET Intelligent Transport Systems

42、International Journal of Automotive Technology

43、International Journal of Crashworthiness

44、International Journal of Impact Engineering

45、International Journal of Shipping And Transport Logistics

46、International Journal of Sustainable Transportation

4.The course content

See curriculum syllabus

5.Mentor profile