Xiaojing XU

Professor, Supervisor

ADDRESS：

Institute of Advanced Forming Technology, Jiangsu University, P.R.China

PHONE：+86-511-88791295; +86-13952877885

FAX：+86-511-88791295

E-mail：xjxu67@ujs.edu.cn, xjxu67@126.com

Websites：http://sme.ujs.edu.cn/teacher_detail.asp?id=258

1. Advanced Large strain technology and nanomaterials by severe plastic deformation

2. Advanced forming technology & equipment design and manufacturing

3. New generation super aluminum alloy

4. Biomedical metallic matrials and surface modification

5. Materials characterizations theories and technologies of microstructures and properties.

6. CAE and MD

Background

1. Post-doctor, Kyungpook National University, korea, 2004-2005

2. Post-doctor, Jiangsu University, Jiangsu, China, 2001-2004

3. Ph.D., Shanghai Jiaotong University, China, 1996-1999

4. B.S. & M.S., Jiangsu University, Jiangsu, China, 1985-1989 & 1989-1992

Teaching Courses

1. Mechanical Engineering Materials and Forming

2. Mechanical Manufacturing Basis

3. Introduction to Materials Science

4. Modern Functional Materials and Forming Technology

5. Failure Analysis of Machine Equipment

6. Theory of strain gradient plasticity

Research Achievement

Publications List

1. Xiaojing Xu, Honghong Shao, Jianchang Gao, Kangmin Chen, Xiaonong Cheng. Effect of SiC film on tensile properties of nanostructured Ti produced by compressive deformation at liquid nitrogen temperature. Materials Science and Engineering: A, 2008, 493(1-2): 195-201.《SCI》(No. 357KN)《EI》(No. 083511483935)

2. Xiaojing Xu. Flame spray welding of NiCrBSi powder alloy on titanium alloy substrate. TMS 2007 Annual Meeting and Exhibition: Innovations in Titanium Technology, 2007, p 259-264 《EI》(No. 084311649676)

3. Xu Xiaojing, Cheng Xiaonong《EI》(No. 083811572028). Fabrication of ultrahigh strength aluminum alloy by the route consisting of solid solution, large deformation and ageing. TMS 2007 Annual Meeting and Exhibition: Aluminum Alloys for Transportation, Packaging, Aerospace and Other Applications, 2007, p 33-38.

4. Xiaojing Xu, Wei Wang and Lan Cai.superplasticity of SiCw/Zn-22Al composites. Journal of Material Science and Technology. 2004, 20 (2): 172-174.《SCI》(No.810LH ) 《EI》(No. 04288261717)

5. X. J. Xu, L. Cai and S. S. Kim. An investigation on high strain rate superplasticity of an Al-Cu-Mg-Ti-Sr ingot alloy. Mater. Sci. Forum (The 11th International Manufacturing Conference in China: IMCC’2004). 2004, 471-472: 692-696. 《SCI》(No. BBF5)《EI》(No. 05179059919)《ISTP》

6. Xu Xiaojing, Wang Wei, Cai Lan. Superplasticity of a SiC particulate reinforced 6A02Al matrix composite. Rare Metals. 2004, 23 (1): 84-87.《SCI》(No. 808FD)《EI》(No. 04278252223)

7. Xu Xiaojing, Zhao Changzheng, Zhang Di, Shi Zhongliang, and Wu Renji. High strain rate superplasticity of sic whisker reinforced pure aluminum composite. Transactions of Nonferrous Metals Society of China. 1999, 9 (3): 500. 《SCI》《EI》

8. Xiao Jing Xu, Seock Sam Kim, Kang Min Chen, Qi fu Luo, Yong Shi Zheng. Analysis of the Failure of Turbocharger Shaft Bearing in Diesel Engines. Key Engineering Materials (Asian-Pacific Conference on Fracture and Strength ’04). 2005, 297-300: 1376-1381.《SCI》(No. BDE59)《EI》(No. 072310638342 )

9. Xiao Jing Xu, Seock Sam Kim, Yong Shi Zheng. Improvement of Strength in 2024 Al Alloy by Enhanced Solution Treatment. Key Engineering Materials(Asian-Pacific Conference on Fracture and Strength ’04). 2005, 297-300: 2362-2367.《SCI》(No.BDE59 )《EI》(No. 072310638025 )

10. Xu Xiaojing, Zhang Xuefeng《SCI》(No. 085SD) 《EI》(No. 064410215230), Cao Jinqi, Wang Jianmin, Jiang Weiping. Tensile properties of the 2024Al alloy processed by conventional solid-solution and subsequent equal-channel angular pressing (ECAP). Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). 2006, 35 (s2): 395-397.

11. Xu Xiaojing, Cao Jinqi, Cheng Xiaonong, Mo Jiping. Tensile Properties of 2024 Al Alloy Processed by Enhanced Solid-Solution and Equal-Channel Angular Pressing. Transactions of Nonferrous Metals Society of China (2006 Beijing International Materials week) . 2006, 16(s 3): 1541-1544.《SCI》(No. 140RP)

12. Xu Xiaojing, Shi Lianjie. Low temperature superplasticity of 40Cr steel. J. Iron Steel Res.Int. 2004, 11(4): 56-58.《SCI》

13. X. J. Xu, W. Wang, L. Cai. Superplasticity of a SiCw/2024Al composite made by pressure infiltration.Acta Metall Sin. 2002, 15(5): 425-430.《EI》

14. X. J. Xu, G. L. Liu, L. J Shi, X. N. Cheng and L. Cai. Superplasticity of a water-quenched and tempered 40Cr steel. Acta. Metall Sin. 2004, 17(5): 44-49《EI》(No. 05028785483)

15. X. J. Xu, D. Zhang, Z. L. Shi, C. Z. Zhao and R. J. Wu. High strain rate superplasticity in a SiCw/2024Al composite made by squeeze casting. Acta. Metall Sin. 1998，11(4): 275.《EI》

16. Xu Xiaojing, Zhang Jie, Chen Kangming, Wang Hongyu and Kim Seocksam. Improvement of strength in 2024 Al alloy by enhanced solution treatment. Transactions of Materials and Heat Treatment (The 14th International Federation for Heat Treatment and Surface Engineering). 2004, 25(5): 297-300.《EI》《ISTP》

17. Xu Xiaojing, Wang Hongyu, Chen Kangmin, Liu Xi, Xu Wenwei. Microstructure and properties of flames spray-welding Ni-based wear resistance coating on titanium alloys substrate. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery (Chinese). 2006, 37 (5): 153-157. 《EI》(No. 06249939006)

18. Xu X.J., Cao J.Q.《EI》 (No. 064710257961), Jiang Y.J., Luo S.X., Zhang X.F. Tensile properties and dislocation strengthening of CP-Ti processed by equal-channel angular pressing at 823 K. Gongneng Cailiao/Journal of Functional Materials (Chinese). 2006, s: 657-659.

19. Xu XJ, Jiang YJ, Luo SX, et al. Effect of SiC film on tensile and tribological properties of nanostructured Ti《SCI》(No. 216GQ) :. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). 2007, 36 (s1): 911-914.

20. Xiaojing XU, Xuefeng Zhang, Jinqi Cao, Kangmin Chen, Li Pan. Tensile properties and dislocation strengthening of CP-Ti processed by equal-channel angular pressing at 723K.Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007, v A: 669-672.《EI》(No. 073410774687)

21. Xu Xiaojing, Cao Jinqi. A simulation and study on strain uniformity of equal channel angular pressing.Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007, v B: 1423-1428.《EI》(No. 073410774801)

22. Xu Xiao-Jing, Luo Shu-Xian《EI》(No. 074310888008), Jiang Yu-Jie, Cao Jin-Qi. Comparison of flames spray-welded Ni-based wear-resistance coating on steel and titanium substrate materials. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment (Chinese). 2007, 28(n): 259-262.

23. Xu Xiaojing, Zhang Xuefeng《EI》 (No.080911124258), Liu Guiling, Cheng Xiaonong. Work-piece length of the effect on stress and analysis of cracking-criterion under equal channel angular pressing. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering (Chinese). 2008, 44(1): 222-226.

24. Xiaojing Xu, Hao Wang, Xiaonong Cheng. Improvement of tribological behaviour of biomedical nanocrystalline titanium by magnetron sputtered DLC/SiC double layer films. Materials Science Forum (IMRC 2008). 2009, 610-613: 1026-1033.《EI》 (No.20091612041264)《ISTP》(No. BJH58)

25. Xiaojing Xu, Dengfu Xia. Friction and wear properties of magnetron sputtered DLC/SiC films on magnesium alloy. Materials Science Forum (IMRC 2008). 2009, 610-613: 853-858. 《EI》(No. 20091612041296)《ISTP》(No. BJH58 )

26. Xu Xiao-Jing, Zhuo Liu-Cheng, Xia Deng-Fu, Wei Bao-Cun, Hao Xin-Ni. Nanoindentation and friction/wear behaviors of magnetron sputtered CNx/SiC bilayer films on titanium (TA2) substrate. Mocaxue Xuebao/Tribology (Chinese).2009, 29(3): 256-260.《EI》(No. 20092812177354)

27. Xu Xiaojing, Xia Dengfu, Zhuo Liucheng, Hao Xinni, Zong Liang. Friction/wear behaviors of magnetron sputtered SiC film on magnesium alloy. Jiangsu Daxue Xuebao / Journal of Jiangsu University (Natural Science Edition) (Chinese). 2009, 30(2): 143-146. 《EI》(No. 20091412008449)

28. X.J. Xu, X.D Zhu, Z.H. Zhao, K. Chong, C. Cheng, X.N. Cheng. The novel continuous large deformation technology integrating conventional rolling with equal channel angular technology. Materials Science Forum (NanoSPD5-the 5th International Conference on Nanomaterials by Severe Plastic Deformation). 2011, 667-669: 127-132.《EI》(No. 20110813693757)

29. Xiaojing Xu, Xinlan Sheng, Dan Chen, Xiling Xin, Kun Tian, Chunhang Yu. Friction/Wear Behaviors of Magnetron Sputtered TiB2-C Composite Films on Ti6Al4V Alloy Substrate. Advanced Materials Research. 2011, 189-193: 979-982.《EI》(No. 20111113749238)

30. Xiaojing Xu, Zhendan Fei, Cheng Cheng, Zenglei Zhang, Zihao Zhao, Xindong Zhu. Study on Rollers’Angular Velocity Matching of Rolling Driven Equal Channel Angular Deformation Technology. Advanced Materials Research. 2011, 189-193: 974-978.《EI》(No. 20111113749237)

31. Tao Song, Xiaojing Xu, Zhen Fan, Yong Luo, Bin Wang, Guichao Wu. Effect of equal channel angular pressing on microstructure and dislocation strengthening of 3003Al ingot. Advanced Materials Research. 2011, 189-193: 943-948.《EI》 (No. 20111113749231)

32. Tifeng Zhang, Xiaojing Xu, Zhiyong Ling, Wei Pang, Sufeng Wu, Xinlan Sheng, Min Liu. Improvement of tribological behaviour of biomedical nanostructured titanium by magnetron sputtered SiC films. Advanced Materials Research. 2011, 189-193: 1040-1044.《EI》(No. 20111113749251)

33. K. Tian, X.J. Xu, Z. Fan, X.N. Hao, D. Chen, X.L. Xin. Microstructure and wear-resistant SiC film by Magnetron Sputtering. Materials Science Forum (11th IUMRS International Conference in Asia: IUMRS-ICA2010). 2011, 687: 580-584.《EI》

34. X.L. Xin, X.J. Xu, Z. Fan, K. Tian, D. Chen, C.H. Yu, X.L. Sheng. Effect of Carbon-doping on Microstructure and Friction/Wear Behaviors of TiB2 Films. Materials Science Forum (11th IUMRS International Conference in Asia: IUMRS-ICA2010). 2011, 687: 621-624.《EI》

35. X.J. Xu, D. Chen, X.L. Xin, K. Tian, C.H. Yu, X.L. Sheng. Friction/wear properties of magnetron sputtered TiB2-TiN composite films on biomedical metallic titanium alloy. Advanced Materials Research. Accepted.《EI》

36. Z.H. Zhao, X.J. Xu, H. Zhou, X.D. Zhu, C. Cheng, Z.D. Fei. Influence of rolling reduction ratio on continuous confined strip shearing deformation procedure using finite element analysis. Advanced Materials Research. Accepted.《EI》

37. X.J. Xu, C. Cheng, Y. Luo, T. Song, Z.D. Fei. Tensile deformation behaviors of ultra-fine subgrained aluminum. Materials Science Forum. 2011, 683: 189-192.《EI》

38. Xu, Xiaojing, Chen Kangmin, Dai Fengze, Cai Lan. Investigation on superplasticity of SiC particulate reinforced aluminum matrix composite. Jinshu Xuebao/Acta Metallurgica Sinica (Chinese). 2002, 38(5): 544-548. 《SCI》《EI》

39. Xu Xiaojing, Shi Lianjie, Cheng Xiaonong, Cai Lan, Ji Pingping. Investigation on low temperature superplasticity of 40Cr steel. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering (Chinese). 2004, 40(7): 141-144. 《EI》(No. 04448425679)

40. Xu Xiaojing, Ge Xiaolan. Superplasticity of SiC whisker reinforced aluminum matrix composite. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica (Chinese). 2003, 20(3): 127-131.《EI》(No. 2004027806430)

41. Xu Xiaojing, Ge Xiaolan. Superplasticity of a SiCw/Zn-22Al composite. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica (Chinese). 2003, 20(4): 1-4.《EI》(No. 2004088028821)

42. Xu Xiaojing, Liu Guiling, Wang Hongyu, Dai Yachun, Cai Lan. Sliding wear behavior of micrometer Wp/Cu matrix composite. Zhongguo Jixie Gongcheng/China Mechanical Engineering(Chinese). 2005, 26 (19): 1783-1784.《EI》(No. 05459460549)

43. Xu Xiao-Jing, Xu Hai-Dong, Zhang Jie, Wang Jian-Min, Liu Zhong-Mo, Cheng Xiao-Nong, Cai Lan. Investigation on high strain rate superplasticity of Al-Cu-Mg-Ti ingot alloy. Gongneng Cailiao/Journal of Functional Materials (Chinese). 2004, s: 2157-2159. 《EI》(No. 04538754145)

44. Xu Xiao-Jing, Xia Deng-Fu, Zhuo Liu-Cheng, Hao Xin-Ni, Zong Liang. Mocaxue Xuebao/Tribology (Chinese). Friction and wear behaviors of a magnetron sputtered CNx/SiC/Ti film on magnesium alloy. 2009, 29(5): 432-435. 《EI》(No. 20094612449734)

45. Xu Xiaojing, Zong Liang, Zhuo Liucheng, Hao Xinni, Chen Dan. Dry friction/wear behavior of magnetron sputtered CNx/SiC bilayered films on nanocrystal Ti substrates. Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology(Chinese). 2010, 30(2): 201-204. 《EI》(No.20101912923126 )

46. Xu Xiaojing, Wei Baocun, Fang Shiyi, Cheng Xiaonong. Numerical analysis of residual stresses in quenching of aluminum alloy thick plates. Source: Jiangsu Daxue Xuebao (Ziran Kexue Ban)/Journal of Jiangsu University (Natural Science Edition) (Chinese). 2010, 31(3): 296-299. 《EI》(No. 20102513031163)

47. Hao Xin-Ni, Xu Xiao-Jing, Xia Deng-Fu, Zhuo Liu-Cheng, Zong Liang, Wang Hong-Yu. Study of flame sprayed and laser remelted Al-Si coatings on magnesium alloy. Hangkong Cailiao Xuebao/Journal of Aeronautical Materials(Chinese). 2010, 30(4): 43-47.《EI》(No. 20103513196181)

48. Xu, Xiaojing, Zhang Zenglei, Wang Hao, Cheng Xiaonong, Pan Li, Gong Xinlan, Dai Fengyang. Effect of friction on maximum pressing load of scaling-up equal channel angular pressing. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering (Chinese). 2011, 47(1): 102-107.《EI》 (No. 20111213768252)

49. Zong Liang, Xu Xiaojing, Zhou Hai. Molecular dynamics simulation of tension deformation in monocrystalline β-SiC bulk. Jisuan Wuli/Chinese Journal of Computational Physics(Chinese). 2010, 27(6): 898-904.《EI》(No.20105113512616)

50. Chen Dan, Xu Xiao-Jing, Tian Kun, Xin Xi-Ling, Yu Chun-Hang, Sheng Xin-Lan. Friction/wear properties of magnetron sputtered TiB2-TiN composite films on Ti6Al4V alloy substrate. Gongneng Cailiao/Journal of Functional Materials (Chinese). 2010, 41(s3): 480-482.《EI》(No.20110313601360)

51. Zhang Fu-Bao, Xu Xiao-Jing, Wu Gui-Chao, Wang Bin, Luo Yong,Song Tao, Cheng Xiao-Nong. Intergranular resistance of a zirconium microalloyed 6013 type aluminum alloy. Hangkong Cailiao Xuebao/Journal of Aeronautical Materials (Chinese). 2011, 31(1): 52-55.《EI》(No.20111313874944)

52. Xia Deng-Fu, Xu Xiao-Jing, Zhuo Liu-Cheng, Hao Xin-Ni, Zong Liang. Effect of magnetron sputtered DLC/SiC/Ti films on friction/wear behaviors of magnesium alloy. Hangkong Cailiao Xuebao/Journal of Aeronautical Materials(Chinese). 2009, 29(4): 47-51. 《EI》(No. 20093612285296)

53. Xu Xiaojing, Zhang Di, Shi Zhongliang, Zhao Changzheng, Wu Renjie. High strain rate superplasticity of aluminum matrix composite made by squeeze casting. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals (Chinese). 1999, 9(2): 231. 《EI》(No. 1999104816063)

54. XU Xiao-jing, WU Gui-chao, WANG Bing, ZHANG Fu-bao, LUO Yong, SONG Tao, CHENG Cheng, PAN Li, CHENG Xiao-nong. Intergranular corrosion and exfoliation corrosion properties of a strontium microalloyed 7085 type aluminum alloy. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment (Chinese) . 2011, 32 (5): 22-26. 《EI》

55. HAO Xin-ni, XU Xiao-jing, CHEN Dan, YU Chun-hang, SHAO Hong-hong, CHENG Xiao-nong. Investigation on tribological DLC films on titanium under high loads. The Chinese Journal of Nonferrous Metals (Chinese). Accepted.《EI》

56. Xu Xiaojing, Hao Xinni, Lu Shuxian, Zhuo Liucheng, Xia Dengfu. Dry Tribological Properties of Magnetron Sputtered SiC Films on Nanocrystalline Titanium Substrate. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). Accepted.《SCI》《EI》

57. XU Xiao-jing, WU Gui-chao, WANG Bing, ZHANG Fu-bao, LUO Yong, SONG Tao, CHENG Cheng, PAN Li, CHENG Xiao-nong. Strengthening of 7085 Al alloy by large strain deformation with the alloy preheated at solution treatment temperature. Journal of Shanghai Jiaotong University(Chinese). Accepted. 《EI》

58. WANG Bin, XU Xiao-jing, WU Gui-chao, ZHANG Fu-bao, SONG Tao, LUO Yong, CHENG Xiao-nong. Study on the Intergranular Corrosion and Exfoliation Corrosion Behaviors of A High Zinc and Strontium Microalloyed type 2099 Aluminum Alloy. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). Accepted.《SCI》

59. XU Xiao-jing, WU Gui-chao, ZHANG Fu-bao, WANG Bing, LUO Yong, SONG Tao, CHENG Cheng, PAN Li. Study on the intergranular corrosion and exfoliation corrosion properties of 7085 type aluminum alloy. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). Accepted.《SCI》

60. Xin Xiling, Xu Xiaojing, Fan Zhen, Tian Kun, Chen Dan, Yu Chunhang. Effect of Carbon-doped on Microstructure and Tribological Properties of TiB2 Films. Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology(Chinese). Accepted《EI》

61. Honghong Shao, Chunhang Yu, Xiaojing Xu, Ji Wang, Rui Zhai, Xiaojing Wang. Influence of Ti nanocrystalization on microstructure, interface bonding, surface energy and blood compatibility of surface TiO2 films. Applied Surface Engineering. 2010, 257(5): 1649-1654.《SCI》(No.669KW )《EI》(No.20104413341311)

62. F.Z. Dai, X.J. Xu, J.Z. Lu, Y.K.Zhang, L.Cai. Friction Behaviors of SiC Particle-reinforced Cu Matrix Composites. Key Engineering Materials. 2011, 464: 492-495.《EI》(No.20111213770652)

63. J. M. Ji, X.J. Xu, D. Chen, X.L. Xin, K. Tian, X.L. Sheng. Improvement of tribological behaviour of biomedical nanocrystalline titanium by magnetron sputtered CNx/SiC double layer films. Advanced Materials Research. Accepted.《EI》

64. Wang Hong-Yu, Xu Xiao-Jing, Chen Kang-Min, Wang Lan, Zhang Xue-Feng. Influence of medium-tempering treatment on microstructure and properties of Ni based spray-welded coating on titanium substrate. Hanjie Xuebao/Transactions of the China Welding Institution (Chinese). 2006, 27(2): 51-58.《EI》(No. 2006189856870)

65. Wang Hongyu, Cao Jinqi, Xu Xiaojing, Liu Guiling, Zhang Xuefeng. Microstructure and properties of Ni-based WC spray-welding coating on titanium alloys substrate. Source: Run Hua Yu Mi Feng/Lubrication Engineering (Chinese). 2006, 2: 87-92.《EI》(No. 2006199868297)

66. Wang Hong-Yu, Xu Xiao-Jing, Chen Kang-Min, Liu Gui-Ling, Xu Wen-Wei. Microstructure and tribological behavior of Ni-based spray-welding coating on titanium alloys substrate. Hangkong Cailiao Xuebao/Journal of Aeronautical Materials (Chinese). 2005, 25 (6): 38-42.《EI》

67. Wang Hong-Yu, Zhang Xue-Feng, Xu Xiao-Jing, Liu Xi, Chen Kang-Min, Pan Li. Influence of spray-welding technology on microstructures and properties of Ni-based coating on titanium substrate. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals(Chinese). 2005, 5: 799-805.《EI》

68. Yu Chun-Hang, Shao Hong-Hong, Xu Xiao-Jing, Zhai Rui. Research on microstructures and blood compatibility of Ta-doped TiO2 films on ultrafine-grained Ti. Gongneng Cailiao/Journal of Functional Materials (Chinese). 2010, 41(s3): 552-555.《EI》(No.20110313601380)

69. Yu Chun-Hang, Shao Hong-Hong, Xu Xiao-Jing, Zhai Rui. Research of the growth characteristics and biological activity of TiO2 thin films on nano-titanium substrate. Gongneng Cailiao/Journal of Functional Material(Chinese). 《EI》(No. 20102613046198)

70. Yu Chun-hang, Shao Hong-hong, Xu Xiao-jing. Effect of nano-grained titanium on mechanical properties of TiO2 thin films. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). Accepted.《SCI》《EI》

71. Yu Chunhang, Shao Honghong, Xu Xiaojing, Zhai Rui. Influence of Mg interlayer film on microstructures and kinetic clotting time of TiO2 film on nano-grained Ti. Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research (Chinese). 2010, 24(6): 667-672.《EI》(No.20110413625768)

72. Cheng Xiao-Nong, Song Gang, Mo Ji-Ping, Xu Hong-Xing, Xu Xiao-Jing. Tensile properties of 2024 Al alloy processed by enhanced solid-solution and subsequent equal-channel angular pressing. Jiangsu Daxue Xuebao (Ziran Kexue Ban) / Journal of Jiangsu University (Natural Science Edition) (Chinese). 2007, 28(1): 33-36.《EI》

73. Cheng Xiaonong, Ru Jinming, Mo Jiping, Xu Xiaojing. Microstructure and properties of AZ31 processed by solid-solution-large strain deformation and post heat treatment. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering (Chinese). 2009, 38(11): 1950-1954.《SCI》《EI》(No. 20095312588057)

74. J.P. Mo, X.N. Cheng, X.J. Xu, D.F. Xia, X.N. Hao. Nanoindentation and friction/wear behaviors of a magnetron sputtered CNx/SiC films on magnesium alloy. Key Engineering Materials. 2011, 464: 637-641.《EI》 (No.20111213770683)

75. Xiaonong Cheng,Hongxing Xu, Xiaojing Xu, Zenglei Zhang. Tensile properties and dislocation strengthening of commercially pure titanium processed by equal-channel angular pressing at liquid nitrogen temperature. Materials Science Forum. 2011, 682: 171-176.《EI》

76. J.P. Mo, X.N. Cheng, J.M. Ru, X.J. Xu. Effect of initial microstructures on deformation mechanisms of AZ31 magnesium alloy. Materials Science Forum (11th IUMRS International Conference in Asia: IUMRS-ICA2010). 2011, 686: 68-73.《EI》

77. Xu Hongxing, Cheng Xiaonong, Xu Xiaojing, Song Gang, Mo Jiping. Strengthening mechanism of ultra-fine sub-grained Al alloy. Jiangsu Daxue Xuebao (Ziran Kexue Ban)/Journal of Jiangsu University (Natural Science Edition) (Chinese). 2011, 32(1): 51-55.《EI》(No. 20111513904900)

78. Wang Jianmin, Zhou Kongkang, Lu Jin, Xu Xiaojing, Jiang Yinfang. Influence of stacking fault energy on grain-refining during severe shear deforming. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering (Chinese). 2008, 44(11):126-131.《EI》

79. Ge Xiaolan, Jiang Zuo, Xu Xiaojing, Cai Lan, Tao Yiyi. Research on the SiCp/Cu composite material's cutting performance and machined surface texture. Source: Zhongguo Jixie Gongcheng/China Mechanical Engineering (Chinese). 2006, 17(9): 965-968. 《EI》

80. Zhang Jie, Xu Xiaojing, Dai Fengze. Vacuum brazing of SiCp/Cu composite. Hanjie Xuebao/Transactions of the China Welding Institution (Chinese). 2007, 28 (9): 87-90.《EI》(No. 20074310888435)

81. Wang Jianmin, Xu Xiaojing. Sliding wear characteristics of Al-Cu-Cr composite made by powder metallurgy. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery (Chinese). 2006, 37(11): 160-162. 《EI》(No. 20070310373650)

82. Ge Xiaolan, Xu Xiaojing, Zhang Jie. Wear behaviour of submicrometer SiCp reinforced Al matrix composite. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica (Chinese). 2006, 23(5): 1-6.《EI》(No. 20070310372175)

83. Wang Jianmin, Lu Jin, Xu Xiaojing, Jiang Yinfang, Pan Li. Processing of micro-structural evolution of a medium-carbon steel by equal-channel angular pressing. Zhongguo Jixie Gongcheng/China Mechanical Engineering (Chinese). 2006, 17(supple 2) : 384-387.《EI》(No. 20072010603425)

84. Wang Jianmin, Lu Jin, ZhouKongkang, Xu Xiaojing, Jiang Yinfang. Manufacture of ultra-fine grain medium-carbon steel by severe plastic deformation. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery (Chinese). 2006, 37(12): 209-212《EI》(No. 20070710428275)

85. Zhang Jie, Xu Xiao-Jing, Dai Feng-Ze. Effect of adding graphite on wear resistance of submicrometer SiCp/Cu composite. Jinshu Rechuli/Heat Treatment of Metals(Chinese). 2007, 32(9): 78-80.《EI》(No. 20074210875829)

86. Wang Jianmin, Lu Jin, Jiang Yinfang, Zhou Kongkang, Xu Xiaojing. Grain-refining evolution for quenched medium-carbon steel by equal-channel angular pressing. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery (Chinese). 2007, 38(12): 185-189. 《EI》(No. 20081311171476)

87. Wang Jian-Min, Lu Jin, Li Xin-Cheng, Cheng Xiao-Nong, Xu Xiao-Jing. Ultra-fine grained medium-carbon steel produced by equal-channel angular pressing process. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment (Chinese). 2008, 29(2): 76-81.《EI》(No.20082311303103)

88. Zhang Jie, Xu Xiao-Jing, Jiang Guo-Yong, Bai Hong-Xiang. Failure analysis of SWC620 universal coupling of 1700 rolling mill. Source: Jinshu Rechuli/Heat Treatment of Metals (Chinese). 2005, 338 (30(10)): 81-83.《EI》(No. 2005469481431)

89. Ge Xiao-Lan, Xu Xiao-Jing, Cai Lan, Chen Kang-Min, Ju Zhi-Lan. Effect of grain size and content of SiCp on tribology characterization of SiCp/Al composites. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals (Chinese). 2005, 15 (3): 458-462.《EI》

90. Ge Xiao-Lan, Xu Xiao-Jing, Zhang Jie, Ju Zhi-Lan. Wear properties of sub-micrometer SiCp/Al composites. Jiangsu Daxue Xuebao (Ziran Kexue Ban) / Journal of Jiangsu University (Natural Science Edition) (Chinese). 2006, 27 (2): 144-146.《EI》(No. 2006219897535)

91. Ge Xiaolan, Xu Xiaojing. Current situationand prospect of automotive materials. Qiche Gongcheng/Automotive Engineering (Chinese). 2002, 24 (4): 294-296.《EI》

92. Ge Xiaolan, Xu Xiaojing, Jiang Zuo, Ju Zhilan, Tao Yiyi. Investigation on wear behaviour of micrometer SiCp reinforced Al matrix composite. Zhongguo Jixie Gongcheng/China Mechanical Engineering (Chinese). 2004, 20: 1871-1875.《EI》

93. Ju Zhilan, Hua Guoran, Xu Xiaojing, Ge Xiaolan. Influence of SiCp size and content on wear surface and sub-surface of SiCp/Al composites. Run Hua Yu Mi Feng/Lubrication Engineering (Chinese). 2004, 5: 19-22.《EI》

94. Zhang Jie, Xu Xiao-Jing, Chen Kang-Min, Wu Jing, Pan Li, Xu Wen-Wei. Effect of SiCp size on wear-resistance of SiCp/Cu matrix composite. Mocaxue Xuebao/Tribology (Chinese). 2003, 23(4): 301-305.《EI》

95. Tao Yiyi, Ge Xiaolan, Xu Xiaojing, Jiang Zuo. Influences of SiC particle size and content on the mechanical properties and wear resistance of the composites with Al matrix. Key Engineering Materials, 2008, 375-376: 430-434.《EI》

96. X.G. Cui, C.Y. Cui, X.N. Cheng, X.J. Xu, J.Z. Lu, J.D. Hu, Y.M. Wang. Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting. Materials Science and Engineering A, 2010, 527(27-28): 7400-7406. 《SCI》《EI》 (No. 20103813248286)

97. Fei Zhou, Kangmin Chen, Meiling Wang, Xiaojing Xu, Hua Meng, Min Yu, Zhendong Dai. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air《SCI》《EI》. Wear, 2008, 265(7-8): 1029-1037.

patents

[1] Xiaojing Xu, Kai Chong, Xiaonong Cheng, Shuxian Lu, Hongyu Wang, Hao Wang, Zenglei Zhang, Yujie Jiang. Deformation processing machine of continuous equal channel angular pressing. ZL 200910183584.X.

[2] Xiaojing Xu, Hongyu Wang, Xiaonong Cheng, Kai Chong, Zenglei Zhang, Zihao Zhao, Cheng Cheng. Fabrication technology of texture-controlled fine-grain metallic materials based on large strain deformation and recrystallization. ZL 200910183587.3.

[3] Xiaojing Xu, Xiaonong Cheng, Hongyu Wang, Yujie Jiang, Hao Wang, Zenglei Zhang, Kai Chong, Guiling Liu. Large strain processing technology intergrating conventional Tandem rolling with equal channel angular technology. ZL 200910183585.4.

[4] Xiaojing Xu, Zenglei Zhang, Cheng Cheng, Li Pan, Shutian Fan, Yingfang Jiang, Guoding Yuan, Guiling Liu, Yachun Dai, Xiaolan Ge, Hongyu Wang, Xiaonong Cheng. Scale-up dies of equal channel angular pressing. ZL 200910036092.8.

[5] Xiaojing Xu, Bin Wang, Hongyu Wang, Guichao Wu, Zihao Zhao, Cheng Cheng, Yong Luo, Tao Song, Zhendan Fei, Xiaonong Cheng. Sr microalloyed high Zn 2099 type aluminum alloys and its fabriction technology. ZL 201010123428.7.

[6] Xiaojing Xu, Hongyu Wang, Zihao Zhao, Cheng Cheng, Li Pan, Tao Song, Fubao Zhang, Guichao Wu, Bin Wang, Xiaonong Cheng. Zr microalloyed 6013 type aluminum alloys and its fabriction technology. ZL 201010134408X.

[7] Xiaojing Xu, Bin Wang, Yong Luo, Hongyu Wang, Guichao Wu, Li Pan, Zihao Zhao, Cheng Cheng, Tao Song, Xiaonong Cheng. Sc and Sr composite microalloyed high Zn 2099 type aluminum alloys and its fabriction technology. ZL 2010101344041.

[8] Xiaojing Xu, Xinni Hao, Dan Chen, Chunhang Yu, Honghong Shao, Mingxi Fu, Liang Zong, Hongyu Wang, Xiaonong , Cheng. Fabriction technology of DLC films with load-bearing capacity on titaminum substrate. ZL 200910036095.1.

[9] Xiaojing Xu, Xinni Hao, Dan Chen, Chunhang Yu, Honghong Shao, Mingxi Fu, Liang Zong, Hongyu Wang, Xiaonong Cheng. Fabriction technology of the films with shell-type microstructure, ultra-low elastic modulus and high wear-resistance on titaminum substrate. ZL 200910036094.7.

[10] Xiaojing Xu, Dengfu Xia, Hongyu Wang, Xinni Hao, Jie Zhang, Xiaonong Cheng. Fabriction technology of the thick coating with dense microstructure on magnium substrate. ZL 200910232935.1

[11] Xiaojing Xu, Hongyu Wang, Kangmin Chen. Flame spraying technology of wear-resistant coating on titaminum substrate. ZL 200410065213.9.

[12] Xiaonong Cheng, Kai Chong, Guiling Liu, Cheng Cheng. Fabrication technology of high performance metallic materials based on continuous equal channel angular pressing driven by multi-pairs rollers. ZL 200910183586.9. , Hongyu Wang, Yujie Jiang, Zenglei Zhang, Hao Wang, Xiaojing Xu

Represent Projects

China (grant No.51074079): An investigation on rollings-driven equal-channel-angular deformation technique and aluminum's strain strenthening mechanisms.

2. Industry Support Projectof Science and Technologyof Jiangsu Province of China (No.BE2008118): New generation super aluminum alloy (2099, 7085, 6013).

3. Industrialization boost project of scientific and technological achievements of university of Jiangsu province of China (Grant No. JH10-37): Scale-up and industrialization of equal channel angular pressing.

4. Outstanding Young Scientist Career Award of Jiangsu University of China: Investigation of selected fronts in mechanical manufacturing and materials sciences.

5. Tribology Laboratory Fund of Jiangsu Province of China(No.kjsmcx06005): Tribological surface engineering of biomedical ultra/nano-grained titanium.

6. Jiangsu Provincial Key Laboratory for Interventional Medical Devices (No. JR1106): An investigation on surface treatments and its charateristics of nano-grained metals for blood compatibility.

Honors and Awards

1. Cultivate Candidate of Outstanding Young Scientist Career Award of Jiangsu University of China

2. Outstanding postgraduates supervisor of Jiangsu University

3. Outstanding teacher of Jiangsu University

Society Memberships:

1. Evaluation expert of State Educational Ministry Fund for Returned Overseas Chinese Scholars

2. Academic Orientation Leader of National Key Cultivate discipline (Mechanical Manufacturing and its Automation)

3. Member of Chinese Mechanical Engineering

4. Member of Chinese Materials Research Society

5. Member of Chinese Nano Science and technology Society

6. Member of Chinese Heat Treatment Society

7. Member of Chinese Mechanical Engineering Society